Motul 8100 X-clean 5W40 C3 Fully Synthetic Engine Motor Oil, Dexos2 LL04 229.51, 4 Litres
Description
-
100% synthetic engine oil, specially designed for Diesel Particulate Filters (DPF) and Three Way Catalytic converters. Any car powered by turbo Diesel direct injection or gasoline engines, EURO IV and EURO V emission regulation compliant, requiring an ACEA C3 engine lubricant, high HTHS viscosity and (Mid-SAPS).
100% synthetic engine oil, specially designed for Diesel Particulate Filters (DPF) and Three Way Catalytic converters. Any car powered by turbo Diesel direct injection or gasoline engines, EURO IV and EURO V emission regulation compliant, requiring an ACEA C3 engine lubricant, high HTHS viscosity and (Mid-SAPS).
Specifications:
-
Standards:
-
ACEA C3
-
API SN / CF
-
-
Approvals:
-
BMW Long Life 04 (LL 04)
-
Ford WSS M2C 917A
-
GM Dexos2 (replaces GM-LL-A-025 & GM-LL-B-025)
-
MB 229.51
-
Porsche A40
-
Renault RN0710
-
Renault RN0700
-
VW 502.00
-
VW 505.00
-
VW 505.01
-
-
Performances:
-
Fiat 9.55535-S2
-
-
Motul Recommendations:
-
Kia engine oil
-
Hyundai engine oil
-
Honda engine oil,
-
Mitsubishi engine oil,
-
Nissan engine oil
-
Suzuki engine oil
-
Ssangyong engine oil
-
Benefits:
Engines compliant with EURO IV and EURO V emission regulation are fitted with sensitive exhaust gas after treatment systems. Indeed, Sulphur and Phosphorus inhibit catalytic converters operation leading to inefficient exhaust gas treatment; and Sulphated Ashes clog DPFs leading to shorten regenerating cycle, quick oil aging, higher fuel consumption and engine power loss. The ACEA C3 standard demands significant oil film resistance and low emission performance from the lubricant.
MOTUL 8100 X-clean 5W-40 has synthetic base stocks and
dedicated SAPS levels that produce outstanding oil film resistance, reduced friction in the engine and provides after treatment devices compatibility.
MOTUL 8100 X-clean 5W-40 brings high lubricating properties such as wear protection and high temperature resistance for better controlled oil consumption. ACEA C3 lubricants achieve extended drain intervals managed by vehicles on-board computer.
Technical Details:
8100 X-Clean fully synthetic engine oil has been specially designed for new generation cars powered by turbo diesel direct injection or petrol engines, EURO IV or EURO V emission regulation compliant, requiring an ACEA C3 engine oil i.e. high HTHS (> 3.5 mPa.s) viscosity and "Mid SAPS" with reduced content of sulfated ash (≤0.8%), phosphorus (0.07 ≤x ≤0.09%) and sulfur (≤0.3%).