• Suitable for high performance bikes, sports bikes, street & road bikes, trails, off road bikes, enduro, trial…fitted with 4 stroke engines, integrated gearbox or not, wet or dry clutch, engines meeting Euro 2, 3, 4 or 5 emission regulation, fitted with exhaust gas after treatment systems: catalytic converters, air injection into exhaust pipe.

   

Suitable for high performance bikes, sports bikes, street & road bikes, trails, off road bikes, enduro, trial…fitted with 4 stroke engines, integrated gearbox or not, wet or dry clutch, engines meeting Euro 2, 3, 4 or 5 emission regulation, fitted with exhaust gas after treatment systems: catalytic converters, air injection into exhaust pipe...

Grade 50 at high temperature especially suitable for big bore engines thumpers, twins…

Other uses: street bikes without catalytic converters, scooters, ATV’s, UTV’s… 

Specifications:

• Standards: API SN / SM / SL / SJ / SH / SG

• Specifications: JASO MA2 under N° M033MOT165 

• Meets Harley Davidson specifications

Recommendations

• Drain interval : according to manufacturers’ recommendations and tune to your own use

• Can be mixed with synthetic or mineral lubricants

Benefits:

Ester Technology:

• Low traction coefficient Ester to minimise engine internal friction losses and improve performance

• Synergy of Ester with anti-wear additives and improved shear resistance for improved gear protection and life time

• 100% Synthetic lubricant for improved oil film resistance at high temperatures and high revs

• Optimised Phosphorus and Sulfur content (JASO MA2 < 1200 ppm) for better operating conditions of catalytic converters

The innovative anti-wear additives package provides outstanding gearbox protection. FZG Gear Test results: Pass FLS>14. The FZG (Forschungsstelle für Zahnrader und Getriebebau) Test, evaluates fluid lubricating and wear protection properties at the interface of a loaded set of gears. Lubricants are then graded based on their “Failure Load Stage” or FLS rating from FLS 1 (very poor result) up to FLS 14 (outstanding result). 

Comfort:

• JASO has created its own 4-stroke motorcycle standard -JASO T903- which has three grades MA, MA1

• and MA2

• JASO MA2 offers the most efficient friction levels to guarantee the clutch engagement during the three

• riding modes: Starting, Acceleration and Constant speed

Technical Details:

• Color Visual Red

• Viscosity grade SAE J 300 20W-50

• Density at 20°C (68°F) ASTM D1298 0.864

• Viscosity at 40°C (104°F) ASTM D445 126.5 mm²/s

• Viscosity at 100°C (212°F) ASTM D445 18 mm²/s

• Viscosity index ASTM D2270 158

• Pour point ASTM D97 -30°C / -22°F

• Flash point ASTM D92 236°C / 457°F

• TBN ASTM D2896 8.4 mg KOH/g