• Specifically designed for VAG group recent cars, Euro 4, Euro 5 and Euro 6, low Sulfated Ashes, low Phosphorus and low Sulfur rates (Low SAPS).

Specifically designed for VAG group recent cars (Volkswagen, Audi, Skoda and Seat) fitted with Euro 4, Euro 5 and Euro 6 engines that require lubricants with low Sulfated Ashes, low Phosphorus and low Sulfur rates (Low SAPS). Motul Specific 504 00 507 00 5W-30 is fully backwards compatible over previous VW oil standards such as VW 501 01, 502 00, 503 00 and 503 01 for Gasoline engines and VW 505 00, 505 01, 506 00 and 506 01 for Diesel engines Volkswagen R5 and V10 TDI engines from MY2003 to MY2007 must only use an approved VW 506 01 lubricant in viscosity grade 0W-30 such as Motul Specific 506 01 506 00 503 00 0W-30 or Motul Specific 504 00 507 00 0W-30 Drain intervals remain fixed at 15 000 km in Europe for any calling exclusively for VW 501 01, 502 00, 505 00 or 505 01 oils even if the vehicle is using Motul Specific 504 00 507 00 5W-30 or Motul Specific 504 00 507 00 0W-30 Standards ACEA C3 Approvals VW 504 00 - 507 00 Engines compliant with Euro 4, Euro 5 and Euro 6 emission regulation are fitted with sensitive exhaust gas after-treatment systems. Indeed, Sulfur and Phosphorus inhibit catalytic converters operation leading to inefficient gas treatment; and Sulfated Ashes clog DPFs leading to shortening regenerating cycle, quick oil ageing, higher fuel consumption and engine power loss. Volkswagen has developed VW 504 00 and 507 00 standards for lubricants with low Sulfur, Phosphorus and Sulfated Ashes content, compatible with their after treatment systems such as catalytic converters, SCR (Selective Catalytic Reduction) and DPF, in order to guarantee a perfect durability of VAG group engines (Volkswagen, Audi, Skoda, Seat). These types of "long life" oils allow extended drain intervals managed by vehicles on-board computer Drain interval: refer to manufacturers’ recommendations and tune to your own use. Do not mix with lubricants non-VW 504 00 507 00 compliant.