Motul Specific 229.52 5W30 C3 Fully Synthetic Engine Oil, Mercedes Benz 229.52, 5 Litres

£38.77
(1 l = £7.75)
incl. VAT, plus delivery
Not in stock
Delivery time: 2 day(s)

Description

  • Motul Specific 229.52 is a fully synthetic engine oil designed for Mercedes-Benz vehicles fitted with EURO IV engines that require "Mid SAPS" lubricants.

Motul Specific 229.52 is a fully synthetic engine oil designed for Mercedes-Benz vehicles fitted with EURO IV engines that require "Mid SAPS" lubricants.

The specification MB 229.52 applies to some MERCEDES petrol engines, and to all MERCEDES Diesel engines, with or without DPF (diesel particulate filter).

The MB 229.52 standard requires among many other severe constrains from the lubricant a reduced content of Sulfated Ash, Phosphorus and Sulfur in order to be compatible with MERCEDES exhaust gas after treatment systems. The specification MB 229.52 applies to some MERCEDES Gasoline engines, and to all MERCEDES Diesel engines, with or without DPF. This type of oil allows reaching flexible drain intervals managed by vehicles on-board computer.

If you’re unsure then refer to owner’s manual or get in touch and we will be happy to help.

Specifications:

  • Standards

    • ACEA C3

    • API SN

    • API CF

  • Approvals

    • Mercedes Benz 229.52

Benefits:

Engines compliant with EURO IV anti pollution regulation are fitted with sensitive systems for exhaust gas post treatment :
- Sulphur and Phosphorus inhibit catalytic convertors operation and can damage catalytic components : inefficient exhaust gas treatment.
- Sulphated Ashes clog diesel particulate filters : shorten regenerating cycle, higher fuel consumption and engine power loss.
Mercedes-Benz developed MB 229.52 standard for Mid SAPS lubricants (low Sulphur, Phosphorus
and Sulphated Ashes) compatible with post treatment systems. Those oils allow reaching flexible drain intervals managed by computer on board.

RECOMMENDATION
Drain interval : refer to manufacturers’ recommendations and tune to your own use.
Do not mix with lubricants not MB 229.52 compliant.

Technical Details:

Viscosity grade SAE J 300 5W-30
Density at 20°C (68°F) ASTM D1298 0.848
Viscosity at 100°C (212°F) ASTM D445 12.1 mm²/s
Viscosity at 40°C (104°F) ASTM D445 72.6 mm²/s
Viscosity index ASTM D2270 164
Pour point ASTM D97 -39°C / -38°F