• Motul Motocool Factory Line is a ready to use cooling liquid, antifreeze and anti-corrosion for motorcycle cooling systems. Based on monoethyleneglycol, MOTOCOOL FACTORY LINE contains reinforced hybrid anti-corrosion additives suitable for light aluminium alloys used in bike engines. 

Motul Motocool Factory Line is a ready to use cooling liquid, antifreeze and anti-corrosion for motorcycle cooling systems. Based on monoethyleneglycol, MOTOCOOL FACTORY LINE contains reinforced hybrid anti-corrosion additives suitable for light aluminium alloys used in bike engines. 
 
Motocool Factory Line protects the cooling system from freezing ( -35°C) and metallic parts from corrosion. Provides an excellent thermal exchange and then engine cooling efficiency. Avoid engine overheating with its high boiling point : 136°C/277°F (+1.5 bar ).

Offers outstanding anti-corrosion and anti-cavitation properties and is safe to use on seals and plastic parts commonly used in cooling systems.

Nitrite free, amine free, phosphate free, borate free, silicate free.

TYPE OF USE MOTUL MOTOCOOL FACTORY LINE is a racing cooling liquid, ready to use, based on monoethyleneglycol, using organic anti-corrosion additives (OAT – Organic Acid Technology) to provide an outstanding protection to aluminium/magnesium alloys used by bike manufacturers on new engines design. PERFORMANCES Cooling system optimal protection from freezing and metallic parts from corrosion. Specific anti-corrosion agents provides the best protection efficiency on aluminium/magnesium alloys – according to a dynamic corrosion test performed on a bike radiator, MOTOCOOL FACTORY LINE divides by 3 the corrosion rate compared to a common organic coolant. Provides an excellent thermal exchange and then engine cooling efficiency and prevents from boiling. This organic OAT technology provides anti-corrosion properties that remain while high temperature and ageing. Low corrosion inhibitors consumption allows extended drain intervals. Water pumps protection, avoid cavitation. Seals, rubber pipes and plastic parts friendly. Contains a bitterness agent to prevent from drinking: coolants and antifreezes have a sweet taste but are harmful. RECOMMENDATIONS Ready to use, do not add any water Drain intervals: Refer to the manufacturers' recommendation. Do not mix with non-organic products. This product should not be used to protect drinking water systems against freezing. PROPERTIES Nitrite free, amine free, phosphate free, borate free, silicate free. Color Visual Red Density at 20°C / 68°F ASTM D4052 1.072 pH ASTM D1287 8.5 Freezing Protection ASTM D1177 -35°C / -31°F Boiling Temperature 136°C / 277°F (+1.5 bar) Alkalinity Reserve ASTM D1121 2.9 mg KOH/g