Motul 8100 Eco-clean 0W30 C2 Fully Synthetic Engine Oil, M2C950A ST.JLR.03.5007, 1 Litre

(1 l = £11.71)
incl. VAT, plus delivery
Not in stock
Delivery time: 2 day(s)


  • Motul 8100 Eco-clean C2 0W-30 is a high performance fully synthetic fuel economy engine oil specially developed by Motul for engines requiring a low friction, low HTHS viscosity and "Mid SAPS" oil with reduced content of sulphated ash.

As this oil meets ACEA C2 it is suitable for diesel engines fitted with diesel particulate filters (DPFs). It is also suitable for the latest generation of petrol and diesel engines and EURO IV and EURO V emission regulation.

Motul 8100 Eco-clean C2 0W-30 meets ACEA C2 standards, carries API SM/CF performance and is recommended by Motul to be used in Toyota, Honda and Subaru engines.


  • Standards

    • ACEA C2

    • API SN

  • Specifications

    • Ford WSS M2C 950A

    • FIAT 9.55535-GS1

    • FIAT 9.55535-DS1

    • Jaguar Land Rover ST.JLR.03.5007

  • Recommendations

    • TOYOTA

    • HONDA

    • SUBARU

    • SUZUKI

  • Benefits:

    • The TOYOTA, HONDA and SUBARU recommendations require an engine oil  combining both ACEA C2 and a 0W-30 engine oil viscosity in order to guarantee the maximum fuel economy and durability performance for most of their petrol and diesel engines of latest generation produced since 2006.

    • Examples of MOTUL 8100 Eco-clean 0W-30 possible use for these OEMs : TOYOTA 2.0L and 2.2L D4D ; HONDA 2.2L CDTI and i- DTEC ; and SUBARU 2.0L D.

    • Engines compliant with EURO IV and EURO V emission regulation are fitted with sensitive exhaust gas after treatment systems. Indeed, Sulfur and Phosphorus inhibit catalytic converters operation leading to inefficient exhaust gas treatment; and Sulfated Ashes clog DPFs leading to shorten regenerating cycle, quick oil aging, higher fuel consumption and engine power loss. The ACEA C2 standard requests from the lubricant significant fuel economy and low emission performance for powerful engines : MOTUL 8100 Eco-clean 0W-30 has synthetic base stocks and dedicated SAPS levels that generates outstanding oil film resistance, reduces friction in the engine and provides after treatment devices compatibility.

    • MOTUL 8100 Eco-clean 0W-30 brings high lubricating properties such as wear protection and high temperature resistance for better controlled oil consumption. Viscosity grade SAE 0W-30 minimises oil hydrodynamic friction, allowing fuel economy especially when oil is cold. Improves oil flow at start up, faster oil pressure build up, faster rev raisings and faster operating temperature reach.

    • Environment friendly, this type of oil allows fuel consumption reduction and therefore minimises green house gases (CO2) emissions.

    Technical Details:

    This high performance, 100% synthetic fuel economy engine oil has been specially designed for vehicle manufacturers requiring a low friction, low HTHS (< 3.5 mPa.s) viscosity and "Mid SAPS" oil with reduced content of sulfated ash (= 0.8%), phosphorus (0.07 = x = 0.09%) and sulfur (=0.3%).Euro IV and Euro V emissions compliant.