• High performance bikes, sports bikes, street & road bikes, trails, off road bikes, enduro, trial…fitted with 4 stroke engines, integrated gearbox or not, wet or dry clutch, engines meeting Euro 2 or Euro 3 emission regulation, fitted with exhaust gas after treatment systems : catalytic converters, air injection into exhaust pipe.

High performance bikes, sports bikes, street & road bikes, trails, off road bikes, enduro, trial…fitted with 4 stroke engines, integrated gearbox or not, wet or dry clutch, engines meeting Euro 2 or Euro 3 emission regulation, fitted with exhaust gas after treatment systems : catalytic converters, air injection into exhaust pipe.

 

Recommended for specific BMW, APRILIA, MOTO GUZZI, GAS GAS engines requiring SAE 5W-40 viscosity grade oil. Other uses: street bikes without catalytic converters, scooters, ATV’s, UTV’s.

Specifications:

• Standards
  • API SN / SM / SL / SJ / SH / SG
• Specifications
• JASO MA2 under N° M033MOT11

Benefits:

Ester Technology :
- Low traction coefficient Ester to minimise engine internal friction losses and improve performance
- Synergy of Ester with anti-wear additives and improved shear resistance for improved gear protection and life time.
100% Synthetic lubricant for improved oil film resistance at high temperatures and high revs. Optimized Phosphorus and Sulphur content (JASO MA2 < 1200 ppm) for better operating conditions of catalytic converters.

The innovative anti-wear additives package provides outstanding gearbox protection. FZG Gear Test results: Pass FLS>14. The FZG (Forschungsstelle für Zahnrader und Getriebebau) Test, evaluates fluid lubricating and wear protection properties at the interface of a loaded set of gears. Lubricants are then graded based on their “Failure Load Stage” or FLS rating from FLS 1 (very poor result) up to FLS 14 (outstanding result).

RECOMMENDATIONS

Drain interval : according to manufacturers’ recommendations and tune to your own use.
Can be mixed with synthetic or mineral lubricants.

Technical Details:

Color Visual Red
Viscosity grade SAE J 300 5W-40
Density at 20°C (68°F) ASTM D1298 0.855
Viscosity at 40°C (104°F) ASTM D445 79.6 mm²/s
Viscosity at 100°C (212°F) ASTM D445 13.6 mm²/s
Viscosity Index ASTM D2270 175
Pour point ASTM D97 -36°C / -32°F
Flash point ASTM D92 226°C / 438.8°F
TBN ASTM D2896 8.4 mg KOH/g