• High performance motorbikes, sports bikes, street & road bikes, trails, off road bikes, enduro,

  trial…fitted with 4 stroke engines, integrated gearbox or not, wet or dry clutch, engines meeting Euro 2,

  3, 4 or 5 emission regulation

High performance motorbikes, sports bikes, street & road bikes, trails, off road bikes, enduro,

trial…fitted with 4 stroke engines, integrated gearbox or not, wet or dry clutch, engines meeting Euro 2,

3, 4 or 5 emission regulation, fitted with exhaust gas after treatment systems: catalytic converters, air

injection into exhaust pipe...

Suitable for specific KTM, HUSQVARNA, MOTO GUZZI engines requiring SAE 10W-60 viscosity grade

oil.

Other uses: street bikes without catalytic converters, scooters, ATV’s, UTV’s…

 

PERFORMANCE

STANDARDS API SN / SM / SL / SJ / SH / SG

SPECIFICATIONS JASO MA2 under N° M033MOT163

 

Protection

Ester Technology:

- Low traction coefficient Ester to minimize engine internal friction losses and improve

performance

- Synergy of Ester with anti-wear additives and improved shear resistance for improved gear

protection and life time.

100% Synthetic lubricant for improved oil film resistance at high temperatures and high revs.

Optimized Phosphorus and Sulfur content (JASO MA2 < 1200 ppm) for better operating conditions of

catalytic converters.

The innovative anti-wear additives package provides outstanding gearbox protection. FZG Gear Test

results: Pass FLS>14. The FZG (Forschungsstelle für Zahnrader und Getriebebau) Test, evaluates

fluid lubricating and wear protection properties at the interface of a loaded set of gears. Lubricants are

then graded based on their “Failure Load Stage” or FLS rating from FLS 1 (very poor result) up to FLS

14 (outstanding result).

 

Comfort

JASO has created its own 4-stroke motorcycle standard -JASO T903- which has three grades MA, MA1

and MA2.

JASO MA2 offers the most efficient friction levels to guarantee the clutch engagement during the three

riding modes: Starting, Acceleration and Constant Speed.

RECOMMENDATIONS

Drain interval: according to manufacturers’ recommendations and tune to your own use.

Can be mixed with synthetic or mineral lubricants.

 

PROPERTIES

Color Visual Red

Viscosity grade SAE J 300 10W-60

Density at 20°C (68°F) ASTM D1298 0.862

Viscosity at 40°C (104°F) ASTM D445 160.1 mm²/s

Viscosity at 100°C (212°F) ASTM D445 23.9 mm²/s

Viscosity index ASTM D2270 181

Pour point ASTM D97 -33°C / - 27°F

Flash point ASTM D92 232°C / 450°F

TBN ASTM D2896 8.4 mg KOH/g