Motul 7100 4T 10W50 Fully Synthetic Engine Oil, 1 Litre

£13.03
(1 l = £13.03)
incl. VAT, plus delivery
Not in stock
Delivery time: 2 day(s)

Description

  • High performance bikes, sports bikes, street & road bikes, trails, off road bikes, enduro, trial…fitted with 4 stroke engines, integrated gearbox or not, wet or dry clutch, engines meeting Euro 2 or Euro 3 emission regulation

High performance bikes, sports bikes, street & road bikes, trails, off road bikes, enduro, trial…fitted with 4 stroke engines, integrated gearbox or not, wet or dry clutch, engines meeting Euro 2 or Euro 3 emission regulation, fitted with exhaust gas after treatment systems: catalytic converters, air injection into exhaust pipe. Recommended for specific DUCATI, KTM, BMW engines requiring SAE 10W-50 viscosity grade oil. Other uses: street bikes without catalytic converters, scooters, ATV’s, UTV’s.

Specifications:

  • Specifications

    • STANDARDS API SN / SM / SL / SJ / SH / SG

    • APPROVAL JASO MA2 under N° M033MOT118

Benefits:

Protection
Ester Technology:

  • Low traction coefficient Ester to minimize engine internal friction losses and improve performance

  • Synergy of Ester with anti-wear additives and improved shear resistance for improved gear protection and life time.

100% Synthetic lubricant for improved oil film resistance at high temperatures and high revs. Optimized Phosphorus and Sulphur content (JASO MA2 < 1200 ppm) for better operating conditions of catalytic converters.

The innovative anti-wear additives package provides outstanding gearbox protection. FZG Gear Test results: Pass FLS>14. The FZG (Forschungsstelle für Zahnrader und Getriebebau) Test, evaluates fluid lubricating and wear protection properties at the interface of a loaded set of gears. Lubricants are then graded based on their “Failure Load Stage” or FLS rating from FLS 1 (very poor result) up to FLS 14 (outstanding result).

Comfort
JASO has created its own 4-stroke motorcycle standard -JASO T903- which has three grades MA, MA1 and MA2.
JASO MA2 offers the most efficient friction levels to guarantee the clutch engagement during the three riding modes: Starting, Acceleration and Constant Speed.

Technical Details:

Color Visual Red
Viscosity grade SAE J 300 10W-50
Density at 20°C (68°F) ASTM D1298 0.861
Viscosity at 40°C (104°F) ASTM D445 120.5 mm²/s
Viscosity at 100°C (212°F) ASTM D445 18.1 mm²/s
Viscosity Index ASTM D2270 167
Pour point ASTM D97 -33°C / -27.4°F
Flash point ASTM D92 232°C / 449.6°F
TBN ASTM D2896  8.4 mg KOH/g