• CFS 5w40 is suitable for fast road, race, rally, sprints and hill climbs. It is also suited to engines with hydraulic tappets.

100% Synthetic Motorsport Oil

High Film Strength For Ultimate Protection

Reduces Wear On Cold Start Up

The Millers Oils CFS (Competition Fully Synthetic) range of motorsport engine oils have been updated and now benefit from the addition of NanoDrive low friction technology. This provides an impressive 26% reduction in friction over the previous range of CFS oils resulting in improved engine horsepower and torque, reduced engine wear and better efficiency.

CFS 5w40 is suitable for fast road, race, rally, sprints and hill climbs. It is also suited to engines with hydraulic tappets. The competition full synthetic engine oil is formulated with 100% synthetic base fluids, including a synergistic blend of three esters combined with the latest additive technology for maximum performance. The ultra low friction, nano technology additives successfully proven in motorcycles with wet clutches.

Use for competition or modified engines where maximum power release is the preferred criteria. Formulated for high revving engines used in circuit racing or for larger engines for short duration i.e. hill climbs and sprints.

Fully synthetic oils provide many outstanding performance benefits over conventional mineral oil

By utilising both polyalphaolefins (PAO) and ester synthetics specially selected to minimise the amount of polymer used, the lubricant film provided is more resistant to 'shear' and viscosity loss in high stress areas

Load carrying capacity many times that of mineral oil. High film strength for ultimate protection. Outstanding cold flow properties for reduced wear at start up. Excellent thermal stability and oxidation resistance. Suitable for operating at 125°C with peak temperatures up to 150oC.

Provides the optimum balance between hydrodynamic and boundary lubrication and the power absorbed through pumping losses to ensure maximum power release

Manufactured to far exceed the requirements of API SL/CF and ACEA A3/B4

Ideal for fast road or track day use, especially in engines where a 5w30 is normally specified

Suitable for operating at 125°C with peak temperatures up to 150°C

All the engine oils in the CFS range are formulated with 100% synthetic base fluids, including a synergistic blend of three esters combined with latest NanoDrive additive technology for maximum performance.

 

'What is NanoDrive Technology.?'

NanoDrive technology uses spherical nanoparticle structures within the oil. Configured in a similar sort of composition to an onion, with 'skins', the Nano particles retain their protective properties under load, even under extreme pressure and will only 'shed' a layer without overall particle failure and loss of viscosity. The nanoparticles 'fill' any rough metallic surfaces to create a super smooth surface which ensures minimum wear on engine components and maximum power.

Millers fully synthetic oils provide many performance benefits over conventional mineral oil. These benefits include -

• Load carrying capacity many times that of mineral oil.

• High film strength for ultimate protection.

• Outstanding cold flow properties for reduced wear at start up.

• Excellent thermal stability and oxidation resistance.

• The synergistic blend of three esters gives improved lubricity, reducing friction and enhancing the oils performance.